FUTABA SkyLeaf BP Instruction Manual page 18

This page is an explanation of when to make it into an engine.
6
● Adjust the engine mount position if the center
position is offset.
● Find the correct position and open a hole of 4 mm.
7 1
● Fix the Engine mount securely with M4 × 25
Hexagon bolts on the firewall, M4 Nylon Nuts and
M4 washers
18
(It is unnecessary in case of EP.)
1 8
● Install the Fuel tank to the fuselage with
Hook-and-Loop Tape.
9
1
● Depending on the position of the throttle of the
engine to be used, install Throttle Servo.
● Drill a hole in the wood screw in
the servo mount. Fix the servo with
4 wood screws.
● Depending on the
engine you have
chosen, there are
also cases here.