Rear Differential Front Member - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

7. Rear Differential Front

1) Disconnect ground cable from battery.

2) Jack-up the vehicle.

3) Using a transmission jack, support rear

differential, and remove rear differential front mem-

Rear differential front member

B: INSTALLATION

1) Install rear differential front member.

Tightening torque:

T1: 65 N·m (6.6 kgf-m, 48 ft-lb)

T2: 110 N·m (11.2 kgf-m, 81 ft-lb)

C: INSPECTION

1) Check rear differential front member for

damage, bend, or corrosion.

If damage, bend, or corrosion is excessive, replace

rear differential front member.

2) Check bushings of rear differential front mem-

ber for cracking, hardening, or damage.

If cracking, hardening, or damage is excessive,

replace rear differential front member.

REAR DIFFERENTIAL FRONT MEMBER

Differentials

Table of Contents