Table of Contents
Advertisement
Siemens Building Technologies
Cerberus Division
1
Introduction
The Cerban Splitter CBS-3 accepts in input a serial line on which data are transmitted
using Cerban protocol and outputs the signal to two serial lines with the same protocol.
The Cerban Splitter CBS-3 is composed by one CPU board to which is connected an
asynchronous board with four communication lines.
1.1
Document overview
This manual is intended as a guide for planning, installation and service personnel of
Cerberus systems which use CBS-3 device.
The manual is divided into 5 chapters and 1 annex; a Table of Contents and an Index
allow easy referencing to the arguments.
Chapter 1 is an introduction to the manual.
-
Chapter 2 describes the product.
-
Chapter 3 shows how to install the CBS-3, to supply and connect it.
-
Chapter 4 shows how to configure the CBS-3.
-
Chapter 5 describes how you can identify problems that can possibly arise.
-
Annex A lists the firmware versions available for the Cerban Splitter
-
1.2
Related publications
The following documents could be useful in dealing with Cerban Splitter and under-
standing how it relates to other pieces of the CMS/LMS network:
CS11 commissioning manual
-
CS4 commissioning manual
-
GW-20 Technical manual
-
GW-21 Technical manual
-
e1114
e1112
1
e1148c
06.2000
Advertisement
Table of Contents
