Configuration And Setup Procedures - Omron NX-SID Series User Manual

6 System Configuration and Setup
6-1

Configuration and Setup Procedures

This section describes the procedures for using the Sysmac Studio to configure and set up the safety
control system.
Make the settings in the following order.
1. Slave Terminal Configuration and Settings
2. Configure and set up the safety network (FSoE).
3. Select the connected input devices and output devices to set up the input terminals and output ter-
minals.
4. Register the device variables.
5. Expose the variables to the NJ/NX-series CPU Unit.
6 - 2
NX-series Safety Control Unit User's Manual (Z930)