Checking External Device Wiring; Overview Of Functions For Checking Wiring - Omron NX-SID Series User Manual

8 Checking Operation and Actual Operation
8-5

Checking External Device Wiring

This section describes the functions that you use on the Sysmac Studio to check the wiring of external
devices connected to the Safety CPU Unit.
You can obtain information on the Safety I/O Unit to which external devices are connected and confirm
that external devices are correctly wired by placing the Sysmac Studio online with the Safety CPU Unit
and changing to DEBUG mode.
8-5-1

Overview of Functions for Checking Wiring

This section describes the functions that you use on the Sysmac Studio to check external device wiring.
Functions for checking wiring
Monitoring safety I/O terminals
Monitoring safety I/O data
Troubleshooting safety I/O terminals
Clear All Memory operation for the Safety I/O Unit
The functions to check wiring are executed while you are online to the Safety CPU Unit in DEBUG
mode or RUN mode.
8 - 20
Reference page
8-5-2 Monitoring a Safety I/O Unit on page 8-21
8-5-2 Monitoring a Safety I/O Unit on page 8-21
8-5-3 Troubleshooting Safety I/O Terminals on page 8-26
8-5-4 Clear All Memory Operation for the Safety I/O Unit on
page 8-27
NX-series Safety Control Unit User's Manual (Z930)