KVH Industries TracVision 4 Technical Manual page 66

TracVision 4 Installation and Technical Manual
Manual Positioning Commands
G-2
Help on Parser Commands
Function:
Command:
Argument:
Response:
Calculate Skew Angle
Function:
Command:
Argument:
Response:
G.2 Manual Positioning Commands
To execute the following commands, first put the Antenna Unit in
idle mode by typing HALT and pressing "ENTER." Positioning
commands may be entered after the antenna comes to rest.
Azimuth Angle
Table G-2
Function:
Command:
Argument:
Response:
Elevation Angle
Function:
Command:
Argument:
Response:
lists parser commands
HELP
none
print a list of all parser commands
report skew angle of the current satellite
SKEWANGLE
none
SKEW ANGLE = XXXX.X
commands a manual azimuth angle that the
mechanism moves to
AZ,xxxx (range is 0000-3599)
desired azimuth angle of the mechanism relative to
external magnetic reference, or baseplate fwd,
000°-359.9°
echoes the command; mechanism moves at a
fixed velocity
commands a manual elevation angle that the
mechanism moves to
EL,xxx (range is 100-850)
desired elevation angle of the mechanism relative to
up, or external sensor attitude reference, 10.0°-
85.0°
echoes the command; mechanism moves at a
fixed velocity