Cables And Accessories; Pinout And Signal Descriptions - National Instruments NI USB-6008 User Manual And Specifications

Cables and Accessories

Table 4 contains information about cables and accessories available for the NI USB-6008/6009. For a
complete list of accessories and ordering information, refer to the pricing section of the NI USB-6008
or NI USB-6009 product page at
Accessory
USB-6008/6009 Accessory Kit
USB-6000 Series Prototyping Accessory
Hi-Speed USB Cable
Caution: For compliance with Electromagnetic Compatibility (EMC) requirements, this product must be operated with
shielded cables and accessories. If unshielded cables or accessories are used, the EMC specifications are no longer
guaranteed unless all unshielded cables and/or accessories are installed in a shielded enclosure with properly designed and
shielded input/output ports.

Pinout and Signal Descriptions

Figure 6 shows the pinout of the NI USB-6008/6009. Analog input signal names are listed as
single-ended analog input name, AI x, and then differential analog input name, (AI x+/–). Refer to
Table 5 for a detailed description of each signal.
© National Instruments Corporation
ni.com
Table 4. NI USB-6008/6009 Cables and Accessories
Part Number
779371-01
779511-01
184125-01
184125-02
GND
AI 0 (AI 0+)
AI 4 (AI 0–)
GND
AI 1 (AI 1+)
AI 5 (AI 1–)
GND
AI 2 (AI 2+)
AI 6 (AI 2–)
GND
AI 3 (AI 3+)
AI 7 (AI 3–)
GND
AO 0
AO 1
GND
Figure 6. NI USB-6008/6009 Pinout
.
Four additional screw-terminal connectors,
connector labels, and a screwdriver
Unshielded breadboarding accessory for
custom-defined signal conditioning and prototyping.
You can use up to two accessories per device.
1 m and 2 m lengths
9 NI USB-6008/6009 User Guide and Specifications
Description
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
P1.0
P1.1
P1.2
P1.3
PFI 0
+2.5 V
+5 V
GND