Connector and LED
Information
I/O Connector Signal
The
contain information about M Series connector signals, power, and user-defined terminals. The
LED Patterns
section contains information about M Series USB device LEDs.
Refer to Appendix A,
Note
connector pinouts.
I/O Connector Signal Descriptions
Table 3-1 describes the signals found on the I/O connectors. Not all signals are available on all
devices.
Descriptions,
+5 V Power
Module/Device-Specific
Source, and
USER 1 and USER 2
Information, for device I/O
© National Instruments | 3-1
3
sections