Edit An Entry - AT&T MS2025 User Manual

Directory
Dial, delete or edit entries

Edit an entry

1. When a directory entry appears, press EDIT.
2. Use the dialing keys to edit the name.
• Press
MUTE
• Press or
SELECT to save. Use the dialing keys to edit the number.
3. Press
MENU/
• Press
MUTE
• Press or
• You can include a pause while storing a dialing sequence that requires
one during actual dialing.
i. Press OPTION.
ii. Press
A P appears on the screen.
• Store a signal for switching to temporary tone signalling. If you
have dial pulse (rotary) service, this signal is required for some special
services.
i. Press OPTION.
ii. Press
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
• You can store the flash signal required by some special services as part of a
dialing sequence.
i. Press OPTION.
ii. Press
A F appears on the screen.
4. Press SELECT to save. To exit without making changes, press
MENU/
CANCEL.
/DELETE to delete a character.
to move the cursor to the left or right.
/DELETE to delete a digit.
to move the cursor to the left or right.
or to choose Add pause, then press
to choose Send tone, then press
or
or to choose Add flash, then press
MENU/
MENU/
37
SELECT or SELECT.
MENU/
SELECT or SELECT.
SELECT or SELECT.
OFF
/