Dect 6.0 expansion handset for use with at&t models clp99183/clp99283/clp99353/clp99383/clp99453/clp99483/clp99553/clp99583 with bluetooth wireless technology (35 pages)
Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Quick start guide MS2025 4-line MS2025 4-line Small Business Cordless Handset Small Business Cordless Handset Cordless handset...
Installation You must install and See pages 5-7 for easy charge the handset instructions. battery before using the cordless handset. Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com 1 (800) 222-3111 or call...
Quick reference guide Charge light • On when the handset is charging in the charger. Softkeys (2) • Press to select a menu item displayed above the key. LINE 1/LINE 2/LINE 3/LINE 4 • Press to make a call on the desired line. •...
Page 5
Quick reference guide VOL/ DIR • Press to scroll up while in menus. • During a call, press to increase the listening volume. • Press to show directory entries when the telephone is not in use. MENU/SELECT • Press to enter the menu. •...
Quick reference guide Belt clip Main menu Main menu • Ringers • Phone Settings Using menus Ringers Phone settings Phone Press MENU/ MENU • SELECT show the first menu item, Ringers. • Press to scroll through menu items. BACK SELECT •...
Charger installation Install the charger as shown below. Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION Use only the power adapter supplied with this product. To order a replacement www.telephones.att.com power adapter, visit our website at or call 1 (800) 222-3111 1 (866) 288-4268...
Battery installation and charging Install the battery as shown on the following page. Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the charger to charge the battery. For best performance, keep the handset in the charger when not in use.
Page 9
Battery installation and charging Install the battery as shown below. Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
Adding and registering a handset You must register this MS2025 cordless handset with the MS205 console or MS205 deskset before use. Each MS205 or MS205 supports only one cordless handset. When first purchased, the handset shows Choose Handset in Registration at base menu.
Page 11
Adding and registering a handset To register a handset to your MS2085 console Make sure the cordless handset is out of the charger and the screen shows Choose Handset Choose Handset in Registration at base menu. And put in Registration handset on cradle to register.
Page 12
Adding and registering a handset To register a handset to your MS2015 deskset Make sure the cordless handset is out of the charger and the screen shows Choose Choose Handset Handset in Registration at base menu. And in Registration at base menu. put handset on cradle to register.