Table of Contents
Advertisement
What to do in an emergency
5.Block both the front and rear parts
of the wheel by putting a prop in
the diagonal position.
WARNING
- Changing a tire
• To prevent vehicle movement
while changing a tire, always
fully set the parking brake,
and block the wheel by put-
ting a prop in the diagonal
direction.
• We
recommend
wheels be blocked, and that
no person remain, while jack-
ing up a vehicle.
6.Loosen the wheel lug nuts in a
counterclockwise direction, in the
numerical order, as shown in the
illustration. Do not remove any nut
until the tire has been raised off the
ground.
6-14
7.Place the jack in the front or rear
jacking positions, closest to a tire,
that
the
which is to be replaced. Place the
jack under the intended place.
Those intended places should be
the plates welded to the frame with
two tabs. a raised dot to index with
the jack.
- Jack location
To reduce a possible injury, only
use the jack provided in the
vehicle and in the correct jack
position. Never use any other
parts of the vehicle for addition-
al jacking-up support.
OVI065009N
NOTICE
Carefully place the jack, not to
damage the plastic guard. When
you place the jack under the plas-
tic guard and jack up the vehicle,
the plastic guard may be dam-
aged.
OVI065010N
WARNING
Advertisement
Chapters
Table of Contents
