Recalling The Position Memory; Easy Access Function - Hyundai EQUUS 2016 Owner's Manual

Recalling the Position Memory

1. Check that the shift lever is in P
(Park) and the Engine Start/Stop
button is ON.
2. Press the memory button (1 or 2)
to recall the desired position.
There will be a beeping sound.
Then, the driver's seat, outside
rearview mirrors, steering wheel
and HUD (Head-Up Display)
height will be automatically adjust-
ed, as set in the memory.
While the pre-set position is being
recalled, pressing one of the control
buttons for the driver's seat, the out-
side rearview mirror, or the steering
wheel will stop the movement of that
component in that position. Other
components will be continuously
adjusted, as set in the memory.
WARNING
Use caution when recalling the
position memory while sitting in
the vehicle. Immediately push
the seat position control knob,
when the seat moves too far in
any direction.
Convenient features of your vehicle

Easy Access Function

When the engine is turned OFF, and
when the driver exits from the vehi-
cle, the steering wheel moves away
from the driver, and the seat moves
backwards. After entering the vehi-
cle, the steering wheel will move
toward the driver. After turning the
Engine Start/Stop button to the ACC
position, the seat will move forwards.
You can activate or deactivate the
Easy Access Function in the User
Setting Mode. Refer to "User Setting
Mode" in this chapter.
03
3-41