Table of Contents
Advertisement
To defrost outside windshield
1. Set the fan speed in the highest
(extreme right) position.
2. Set the temperature in the extreme
hot (HI) position.
3. Press the defrost button (
4. The (fresh) air intake mode will be
selected automatically.
When the
position is selected,
the lower fan speed will be adjusted
according to the higher fan speed.
Convenient features of your vehicle
Defogging logic
To reduce the possibility of the dew
condensation on the inside of the
windshield, the air intake is automat-
ically controlled according to a driv-
ing condition such as setting in the
or
reset the defogging process, follow
the below steps:
OVI045124N
).
1. Turn the Engine Start/Stop button
ON.
2. Press the defrost button (
3. While pressing the A/C button,
press the air intake control button
at least 5 times within 3 seconds.
The air intake control indicator flash-
es three times at an interval of 0.5
seconds. It indicates that the defog-
ging process is canceled or reset to
the original status.
When the battery is discharged or
disconnected, the system resets to
the defogging default setting.
positions. To cancel or
OVI045125N
).
3-139
03
Advertisement
Chapters
Table of Contents
