Inoperable Conditions Of The Parking Assist System - Hyundai EQUUS 2016 Owner's Manual

Inoperable conditions of the
Parking Assist System
The Parking Assist System may
not properly operate, when:
1. Moisture is frozen over the sensor.
(It will operate normally again
when the frozen ice melts.)
2. The sensor is covered or blocked
with foreign substances, such as
snow or water. (It will normally
operate again when the substance
is removed, and the sensor is no
longer blocked.)
3. The sensor is stained with foreign
substances such as snow or
water. (The sensing range will
return to normal when foreign sub-
stances are removed.)
There is a possible malfunction
with the Parking Assist System
when:
1. The vehicle drives on uneven road
surfaces such as unpaved roads,
gravels, bumps, or slopes.
2. The sensor is interfered with
objects, which generate excessive
noise, such as horns, motorcycle
engines, or truck air brakes.
3. Heavy rain or water is sprayed.
4. Wireless transmitters or mobile
phones are near the sensor.
5. The sensor is covered with snow.
Convenient features of your vehicle
Detecting range may decrease
when:
1. Outside air
extremely hot or cold.
2. The sensor cannot detect an
object, as it is smaller than 39 in (1
m) or narrower than 5.5 in (14 cm)
in diameter.
The following objects may not
be recognized by the sensor:
1. A sharp or slim object, such as
ropes, chains or small poles.
2. An object, such as clothes, spongy
material or snow, absorbs the sen-
sor frequency.
i
Information
1. The warning may not sound
sequentially depending on the speed
and shapes of the objects detected.
2. The Parking Assist System may
malfunction if the vehicle bumper
height or sensor installation is mod-
ified. Any unauthorized installment
of equipment or accessories may
also limit the sensor performance.
3. Sensor may not recognize objects
within 12 in (30 cm), or it may mis-
calculate the distance.
4. When the sensor is frozen or stained
with snow or water, the sensor may
be inoperative until the stains are
removed using a soft cloth.
5. Do not push, scratch or strike the
sensor with any hard objects that
could damage the sensor surface.
This may damage the sensor.
03
temperature is
3-105