Table of Contents
Advertisement
Safety system of your vehicle
Lumbar support (for driver's seat)
The lumbar support can be adjusted
by pressing the lumbar support switch
on the side of the driver's seat. Press
the front portion of the switch (1) to
increase support, or press the rear
portion (2) to decrease support.
Move the lumbar-support component
up or down by pressing either (3) or
(4).
Head Restraint
The driver's and front passenger's
seats are equipped with head
restraints for their safety and comfort.
The head restraints not only provide
comfort for the driver and front pas-
senger, but also protect their heads
and necks in the event of a collision.
2-6
• For maximum effects in case
of an accident, the median
height of a head restraint
should be adjusted to the
gravity center of the occu-
pant's head.
Generally, the center of gravi-
ty of most people's head is
located at the top of their
eyes. Also, adjust the head
restraint as close to your head
OVI035006N
as possible. For this reason,
the use of a cushion, which
holds the body away from the
seatback, is not recommend-
ed.
• Do not drive the vehicle with a
head
because severe injury may
occur to an occupant in the
event of an accident. A prop-
erly-adjusted head restraint
may
against neck injury.
• Do not adjust the driver's
head restraint, while the vehi-
cle is in motion.
OVI035103N
WARNING
restraint
removed,
provide
protection
Advertisement
Chapters
Table of Contents
