SMC Networks SMC2455W User Manual page 17

The SMC2455W is a Plug-and-Play device. When you plug this
Access Point into your network, it will automatically get an IP
address from your DHCP server and begin to provide wireless
connections based on your current network IP configuration.
3.1 | Verify Equipment and Permissions
At computer that you want to install the EZ Connect
Wireless Access Point Utility software, please have the following
items available:
• The EZ Connect Turbo Wireless Access Point CD-ROM
• These installation instructions
Before you proceed with the Utility setup, verify the following:
• You have administrator privileges on the computer that you
are working on. On computers running Windows 2000 or
Windows XP, you must be a member of the Administrator
group to install software and change network settings. If
you cannot run setup, click Log Off from the Start menu,
and then log on with an administrator's account. If you
don't have administrator access please contact your system
administrator.
• Disable any Anti-Virus or other software applications that
could hinder the installation process.
To install the Wireless Access Point Utility program, insert the
"SMC2455W Utility and Documentation" CD-ROM into your
CD-ROM drive. If the CD does not start automatically after a few
seconds, open My Computer, double-click the CD-ROM icon, and
then double-click Setup.exe. The Welcome splash screen should
appear.
Turbo
TM
14