SMC Networks SMC2455W User Manual page 11

1.1 | EZ Connect Turbo 11/22 Mbps Wireless Access
Point LED Indicators
The preceding diagram shows the LED indicator lights on the
EZ Connect Turbo Wireless Access Point. The EZ Connect Turbo
Wireless Access Point has 2 external antennas, which are
adjustable for best wireless reception.
The front of the Wireless Access Point has 3 labeled indicator
lights. When you connect your Access Point to your network,
these lights will be on, off, or blinking, indicating the following
states.
Light On
Ethernet Ethernet Connection
Wireless Wireless Connection
Power/Status Receiving Power
1.2 | Resetting the SMC2455W EZ Connect Turbo
11/22 Mbps Wireless Access Point
To correct temporary connectivity problems, the SMC2455W
Wireless Access Point can be reset by the following methods:
• The physical reset button on the back of the unit.
• You can reset the unit or reset the unit to factory defaults
using the Web-based Utility.
Using the Reset button on the back of the SMC2455W
1. Locate the [Reset] button on the back of the Access Point.
2. Unplug the power from the back of the Access Point for
5 seconds.
Off
No Ethernet
Connection
No Wireless
Connection
Not Receiving
Power
Blinkin
Data being sent or
received over
Ethernet connection
Data being sent or
received over
wireless connection
N/A
8