SMC Networks SMC2455W User Manual page 12

3. Hold down the [Reset] button which is located on the back
of the device. You may need to use a pin or other pointed
object to hold the button down.
4. Plug the power connector into the Wireless Access Point
while holding down the [Reset] button.
5. The "TX/RX" LED will be solid, then flash 5-6 times.
6. Then the "LINK/ACT" LED will blink quickly several times.
7. Release the [Reset] button.
8. Unplug the power from the Access Point for 2 seconds, and
then plug the power back in.
9. The Access Point will reboot and the LEDs will return to the
normal status.
Using the Web-based Utility
1. Log into the SMC2455W Web-based Utility. (See section 4.2
for more information)
2. Click on [Tools] link on the left hand navigation menu, and
then click the [Reset] option.
9