Section 2 | Understanding Wireless Connections - SMC Networks SMC2455W User Manual

Section 2 | Understanding Wireless
Connections
The EZ Connect Turbo Wireless Access Point is based on the IEEE
802.11b Wi-Fi standard, which uses radio transmission for network
connectivity. These 802.11b radio waves travel in all directions,
and can transmit through walls and floors. Wireless transmission
operating range and data throughput rate are based on several
factors, as described below in the following section.
2.1 | Recommendations for Best Wireless Performance
The following information will help you achieve the best wireless
range, coverage, and transmission rate from your wireless
devices:
• You should place the Wireless Access Point in the center of
your wireless network.
• Radio signals can travel farther outside of buildings, and the
best performance is when wireless components are in direct
line-of-sight to one another.
• Putting wireless components in high places helps avoid
obstacles and provides better connectivity.
• Building construction such as metal framing, stucco, and
concrete walls and floors will reduce radio signal strength.
Try to avoid putting the Wireless Access Point next to walls,
large solid objects; or next to large metal objects such as
computer cases, monitors, and appliances
(i.e. microwave ovens).
• Wireless signal range, speed, and strength can be affected by
interference from neighboring wireless networks and
devices. Electro-magnetic devices that operate in the 2.4GHz
frequency range, such as radios, and cordless phones, may
also interfere with wireless transmission.
11