Configuring Qos Interface Queue Shaper - Avaya ERS 45 Series Technical Configuration Manual

5.2 Configuring QoS interface queue shaper

Use the following procedure to create an egress queue shaper for one or more interfaces.
To create an egress queue shaper, use the following command from the Interface Configuration mode:
interface ethernet <port list or ALL>
qos if-queue-shaper [port <portlist>] [queue <1-8>] [name <WORD>] shape-rate
<0-10230000> shape-min-rate <0-10230000>

If you configure the shape rate to 0 for a specific queue or port, shaping is not performed on that
queue or port.
Action Option
<WORD>
port <portlist>
queue <1-8>
shape-min-rate <0-10230000>
shape-rate <0-10230000>
September 2015
Description
Specifies an alphanumeric label used to identify the QoS
interface queue shaper. Value is a character string ranging
from 1–16 characters in length.
Specifies the port or list of ports for which to apply egress
queue shaping.
Specifies the queue for the selected interface port or ports,
on which traffic is shaped. The range of available values is
determined by the OoS agent default queue configuration.
Specifies the minimum QoS interface queue shaping rate,
in kilobits per second (Kbps). Values range from 0
to10230000 Kbps.
Specifies the QoS interface queue shaping rate, in kilobits
per second (Kbps). Values range from 0 to10230000 Kbps.
Avaya Inc. – External Distribution
avaya.com
31