Default Settings: Vsp 7000 - Avaya ERS 45 Series Technical Configuration Manual

7.4 Default Settings: VSP 7000

Default Settings

The VSP 7000 supports 10 precedences used by QoS and non-QoS
o
Precedence levels 1 to 7 are not used by default
o
Precedence level 8 is used by DHCP Relay
 Can be cleared up if IP DHCP Relay is disabled – on by default
o
Precedence levels 9 and 10 are permanently occupied

Precedence level 9 is used by SPB

Precedence level 10 is used by ARP
o
Certain features if enabled can take up one or more precedence levels

Please see Appendix for list of precedence levels used by various features
o
Up to 128 filter components for precedences 1–4 and 256 filter components for
precedences 5–10
o
Up to 128 meters per precedence per hardware device group, usable on a maximum of 8
out of the 10 available precedences
o
Up to 64 counters for precedences 1–4 and 128 counters for precedences 5–10.
o
Up to 32 TCP/UDP port range checkers

Default Queue set is 2 with buffering set to large
Verification
1 Verify QoS queue set and buffer:
7024XLS#show qos agent
QoS Operational Mode: Enabled
QoS NVRam Commit Delay: 10 seconds
QoS Current Queue Set: 2
QoS Next Boot Queue Set: 2
QoS Current Buffering: Large
QoS Next Boot Buffering: Large
QoS Default Statistics Tracking: Aggregate
2 Verify QoS interface group and assignments
7024XLS#show qos if-group
Role
Combination
____________________ ______________ ___________________ __________ ___________
allQoSPolicyIfcs
$qosDisabledIfcs
September 2015
Interface Capabilities
Class
Trusted Input 802, Input IP Aggregate
Unrestricted Input 802, Input IP Disabled
Avaya Inc. – External Distribution
avaya.com
Statistics Storage
Tracking Type
ReadOnly
Other
55