Commissioning
6.3 Parameterizing the device
"MODBUS RTU" parameter (optional)
The "MODBUS RTU" parameter is only available for devices with an RS 485 interface.
Address
Baud rate
Format
Response time
"M-BUS" parameter (optional)
The "M-BUS" parameter is only available for devices with an M-BUS interface.
Primary address 0 - 250
Secondary ad-
dress
The secondary address is generated automatically from the serial number of the device.
Baud rate
Mapping
"Display" parameter
Contrast
Brightness
Dimming
Dim after
Test indicator
68
1 - 247
4800/9600/19200/38400
8N1/8N2/8E1/8O1/
0 - 255 ms
12345678
1200/2400/4800/9600
0-1.
The display contrast can be adjusted in steps.
0 - 10 (default setting 5)
The intensity of the backlighting can be adjusted in steps.
0 - 3 (default setting 3)
The dimming setting of the display can be adjusted in steps.
0 - 3 (default setting 3)
On expiry of the set period, the backlighting is dimmed to the set intensity.
0 - 99 (default setting 3)
Display test indicator
PAC2200
Manual, 05/2018, L1V30415167B-02