Siemens SENTRON PAC2200 Product Manual page 18

Description
2.2 Measuring inputs
Connection types
Two connection types have been provided. The device can be used in TN and IT networks.
Table 2- 1
Short code
3P4W (factory setting)
1P2W (not MID devices)
The input circuit of the device must correspond to one of the connection types listed. Select
the suitable connection type for the purpose.
Connection examples can be found in chapter Connection (Page 39)
NOTICE
The wrong system connection can destroy the device.
Before connecting the PAC2200, you must ensure that the local power supply conditions
agree with the specifications on the rating plate.
The short code of the connection type must be entered in the device settings at startup. You
can find the instructions for parameterizing the connection type in chapter Commissioning
(Page 57).
16
Available connection types
Connection type
3 phases, 4 conductors, unbalanced load
1 phase, 2 conductors, unbalanced load
Manual, 05/2018, L1V30415167B-02
PAC2200