Table of Contents
Advertisement
5 Touch [ PASSWORD ] twice.
The character input screen will appear.
The touched character will be displayed at the top of the screen.
• Four numeric characters can be entered.
• The cursor in the input field moves left or right when [| ] or [ |] is
touched.
• After completing the input password, the character input screen
automatically disappears and the input password is set.
6 Touch [ BACK ] 4 times.
The setting is determined and the display will return to the operation
mode screen.
z The password input screen will be displayed when the power is turned ON, or after the display has been turned OFF.
Enter the previously registered 4-digit password (default "0000").
z To reset the DR-1X, press and hold in the [ SETUP ] button while turning the transceiver ON à the password input
screen will appear à press and hold the [ SETUP ] button for 2 seconds à the reset confirmation screen will appear
à touch "OK?".
Setting the half deviation operation
1 Touch [ SETUP ] then touch [ F ] .
2 Touch [ DEVIATION ] to display "NARROW".
The setting will toggle between "NARROW" and "WIDE" each time
[ DEVIATION ] is touched.
NARROW: Reduces the analog FM/C4FM digital modulation to half.
WIDE:
Uses the normal analog FM/C4FM digital modulation.
3 Touch [ BACK ] twice.
The setting is determined and the display will return to the operation
mode screen.
Factory default: WIDE
28
PASSWORD
123
S E T U P
U P
L
I
N K
8
7
ID MODE
D O W N
L
I
N K
���������
TIMER ID ANNOUNCE
D G - I D
SQL
DEVIATION
ID SET
MODE/REMOTE
R - O F F
NARROW
T - O F F
Tx PW R
V
/
M
S Q L
BACK
BACK
H I
Space
ENT
F
Advertisement
Table of Contents
