Table of Contents
Advertisement
Rear Panel
DR-1X (US and Asian versions)
DR-1XE (European and Australian versions)
TX Antenna Terminal (N-type connector, 50 ohms)
Connect to the transmitting antenna (downlink) with the coaxial cable.
Cooling fan
RX Antenna Terminal (N-type connector, 50 ohms)
Connect to the receiving antenna (uplink) with the coaxial cable.
FUSE Holder (15A/ 32V)
A 15A fuse for the DC power supply through the BACKUP / DC IN jack is attached.
Power Supply BACKUP Jack (DR-1X) / DC IN jack (DR-1XE)
Connect to a 13.8V DC power supply with the supplied DC power cord.
FUSE Holder (DR-1X only)
A 5A fuse for the AC power supply through the AC IN jack is attached.
ACC Jack
Connect to a HRI-200 WIRES-X Interface Unit or a personal computer with the provided PC connection
cable "SCU-20".
CONTROL I/O Connector
This connector allows the repeater to be connected to an external controller for remote operation.
AC IN Jack (DR-1X only)
Connect to a 100-240V AC line outlet with the supplied AC power cord.
GND Terminal
8
Advertisement
Table of Contents
