Deregistering Headset; Deregister Headset From The Synj Sb67138 Base - AT&T TL8900 User Manual

Getting started

Deregistering headset

You may need to deregister your headsets if:
You have already registered the headset and now wish to register
X
your headset to a different telephone base.
-OR-
You have registered the maximum number of headsets and
X
need to replace one of them. You must first deregister all
headsets, and then register each headset you wish to use
again, one at a time.
Please read carefully through all the instructions in this
section before beginning the deregistration process.

Deregister headset from the SynJ SB67138 base

If you already have 10 registered devices and need to replace or
add a new device, or if you wish to change the assigned extension
numbers of your devices, you must deregister the desired
device(s) first, then register the device(s) you wish to use, one
at a time. Deregistering a cordless handset or deskset does not
remove the data saved on that device.
Please make sure the telephone system is not in use before
deregistration. To deregister a headset from the telephone base:
1. On the telephone base, press MENU/
2. Scroll down to Registration and
press
MENU
3. Scroll down to Deregistration and then
press
MENU
4. The telephone base screen shows
Deregister:. Scroll to choose the desired
headset, then press
/ENTER.
/ENTER.
MENU
ENTER
/ENTER.
13
.
COVM
Speed dial setup
Customer support
Registration
>
Register HS
Deregistration
>
Deregister:
>Headset 1
Deskset 2
All