Operational Instructions Pairing; Power On/Off; Connecting The Headset - AT&T FreeAgent BTH01 User Manual

Operational Instructions
Pairing
While the headset is off, press and hold the
button for 6 seconds to start pairing mode.
Once the headset is in the pairing mode, select
'BTH01' among discovered Bluetooth devices
on the phone and enter the password '0000'
to pair the headset. When connected , voice
prompt will be "Connected".
Easy Pairing
The FreeAgent supports easy pairing. When
pairing to a device that supports easy pairing,
there is no need to enter the password '0000'.
Note: Host device also has to support easy pairing.
Multi Pairing
1. All Bluetooth devices to be used in multi
pairing must be first paired individually
using the appropriate profiles. (HSP or HFP
for phone conversation, and A2DP for high
quality audio)
Note: Each profile cannot be used to connect
more than one device simultaneously. See
'Notice' below for more details. The auto
connect function of the headset will connect
each profile to the last connected device.
Page 8
Operational Instructions
2. Once the host devices are paired,
connections can be made by:
a. Turning the headset off and on
(Auto connect function will take effect).
b. Or connecting from host devices.

Power ON/OFF

Press and hold button for 3 seconds to
switch the headset on or off. The Power ON/
OFF voice prompts are "Hello" and "Bye".

Connecting the Headset

Connecting from the phone - Among registered
Bluetooth devices on the phone, select 'BTH01'.
Connecting from the headset - Through
the auto-connect function, the headset
automatically connects to the last device it was
connected to when powered on.
Page 9