Subnet Manager Control Window - Intel True Scale Fabric 12000 Series User Manual

Figure 3-76. Subnet Manager Control Window
3. To start the Fabric Manager, click Start.
The system responds by displaying Starting up in the Status box of the Subnet
Manager Control window.
4. To confirm that the Fabric Manager has started, click Refresh.
Once the Fabric Manager is running, the system reports Running in the Status
box and begins to increment the Uptime counter.
5. Click Close.
3.12.1.1 Restarting the Fabric Manager
1. From the menu, click Subnet Manager.
2. Click Control. The Subnet Manager Control window is displayed.
3. To restart the Fabric Manager, click Restart.
The system responds by displaying Shutting Down in the Status box of the

Subnet Manager Control window.

4. To confirm that the Fabric Manager has started, click Refresh.
Once the Fabric Manager is running, the system reports Running in the Status
box and begins to increment the Uptime counter.
5. Click Close.
3.12.1.2 Stopping the Fabric Manager
1. From the menu, click Subnet Manager.
2. Click Control.
The Subnet Manager Control window is displayed.
3. To stop the Fabric Manager, click Stop.
The system responds by displaying Shutting Down in the Status box of the
Subnet Manager Control window.
4. To confirm that the Fabric Manager has shut down, click Refresh.
Once the Fabric Manager has shut down, the system reports Not Started in the
Status box of the Subnet Manager Control window.
5. Click Close.
July 2015
Doc. Number: G91930 Revision: 005US
®
Intel True Scale Fabric Switches 12000 Series
User Guide
71