Fabric Manager Configuration; Automatically Starting The Fabric Manager; Set Default Gateway Ip Window; Subnet Manager Submenu - Intel True Scale Fabric 12000 Series User Manual

Figure 3-61. Set Default Gateway IP Window
3. Click the Gateway address text box.
4. Type in the correct switch default gateway IP address.
5. Click Apply.
Note: If the DHCP option is selected, no gateway address is necessary.
3.10

Fabric Manager Configuration

Note: This section assumes the user has purchased and activated the embedded version of
the Fabric Manager
3.10.1

Automatically starting the Fabric Manager

To enable the Fabric Manager to automatically start at boot time:
1. From the menu, select Subnet Manager.
The Configuration button is displayed
Figure 3-62. Subnet Manager Submenu
2. Click Configuration.
The Subnet Manager Configuration window is displayed
Figure 3-63. Subnet Manager Configuration Window
3. To configure the Fabric Manager to automatically start with each boot, click
Enabled.
Note: If the user wants to manually activate the Fabric Manager, click Disabled.
July 2015
Doc. Number: G91930 Revision: 005US
.
(Figure 3-62).
(Figure
®
Intel True Scale Fabric Switches 12000 Series
3-63).
User Guide
65