Http/Cli Session Configuration; Ldap Configuration Button; Ldap Authentication Window - Intel True Scale Fabric 12000 Series User Manual

LDAP server receives the request, passes it on to the authentication services, and
responds to the client with a yes or no, either allowing or denying the user access to
the box.
When LDAP is disabled internal authentication becomes the default.
To set up LDAP authentication:
1. From the menu, select Maintenance.
The LDAP Configuration button is displayed
Figure 3-13. LDAP Configuration Button
2. Click LDAP Configuration.
The LDAP Authentication window is displayed
Figure 3-14. LDAP Authentication Window
3. In the LDAP Server IP Address box, enter the address of the applicable LDAP
server.
4. In the LDAP Server Port box, enter the applicable server port number (the default
is 389).
5. Click Apply.
3.3.3

HTTP/CLI Session Configuration

The hyper text transfer protocol (HTTP) and command line interface (CLI) session
configuration feature allows the user to set HTTP and CLI session time out parameters,
as well as set security requirements for the switch.
The session time out duration is the length of time that a session remains active if
there is no GUI activity. If a session is inactive for a time exceeding the time out
duration, the user will be logged out.
July 2015
Doc. Number: G91930 Revision: 005US
(Figure 3-13).
(Figure 3-14).
®
Intel True Scale Fabric Switches 12000 Series
User Guide
33