Chassis Traps; Subnet Manager Configuration File Save As; Chassis Trap Control - Intel True Scale Fabric 12000 Series User Manual

Figure 3-38. Subnet Manager Configuration File Save As
4. To upload a configuration file, in the Upload Config File text box: enter the path to
the alternate embedded subnet manager file (intel_fm.xml). If the path is not
known, the user can use the Browse... button to locate it.
5. Once the new file is located, click the Upload button.
6. In the Subnet Manager Control window for the master subnet manager, click
Stop, Refresh, then Restart to have the new file become active.
7. If applicable in the Subnet Manager Control window for the slave subnet
manager, click Refresh to have the new file become active.
3.6

Chassis Traps

The Chassis Trap Control window allows the user to set default trap scenarios related
to the switch.
1. From the Chassis View menu
The Trap Control button is displayed
Figure 3-39. Chassis Trap Control
2. Click Trap Control.
The Chassis Trap Control window is displayed
July 2015
Doc. Number: G91930 Revision: 005US
(Figure 3-1), select Chassis Traps.
(Figure 3-39).
(Figure
®
Intel True Scale Fabric Switches 12000 Series
3-40).
User Guide
47