Checking the LEDs ... 16 Unit Numbering Convention ... 18 Partitioned Ports ... 18 Using a Switch to Connect Hubs ... 19 Connecting to Non-100BASE-T4 devices ... 20 Appendix A Fast Ethernet Topology Rules Physical Layer Media Specifications ... 23 Basic Rules ...
Page 4
C O N T E N T S Intel Express 100BASE-T4 Stackable Hub Index Customer Support Inside back cover...
Quick Start 1 Install the hub(s). 2 Connect the stack. Use the cascade cables to connect multiple hubs. You need to purchase cascade cables separately from your network services supplier (see Appendix B for more information). Do not use UTP cabling to connect hubs. 3 Connect the devices.
Overview This chapter includes a summary of the Intel Express 100BASE-T4 Stackable Hub’s features and a physical description of the hub and its components. Features Key features of the Intel Express 100BASE-T4 Stackable Hub • Compatibility with the IEEE 802.3u standard for Fast Ethernet.
(TX or T4) to each type of hub. RJ-45 port Intel Express 100BASE-T4 Stackable Hub Physical Description Front panel The front panel of the Express Stackable Hub provides twelve 100BASE-T4 ports, an LED matrix (see “LED matrix” later in this chapter for a description of LEDs), a media adapter slot, and an expansion slot.
C H A P T E R Label Type Hub power supply status Green Stat Hub status Not supported Collision status Overview LED matrix The LED matrix on the Express Stackable Hub’s front panel allows you to view the hub’s operational status, collisions, network utilization, NMM status, and port status.
Page 9
Port Status Port status 1 — 12 (hub ports) 13 — 24 (not used) Intel Express 100BASE-T4 Stackable Hub Color Meaning Green Dynamically indicates the percentage of network utilization for the Ethernet segment in a hub or a stack of hubs. Operates as a bar graph.
The Express Stackable Hub accepts between 100 and 240V AC. Cascade connectors The Cascade Down and Cascade Up connectors and an Intel cascade cable allow you to stack and link multiple Express Stackable Hubs to increase the size of a particular workgroup in your network. The cascade cable connects to the Cascade Down connector on the top hub and the Cascade Up connector on the hub below it.
100BASE-TX 12-port expansion module. Intel Express 100BASE-T4 Stackable Hub Optional equipment The Intel 100BASE-T4 Stackable Hub ships with filler panels installed in the media adapter and expansion slots. Both panels can be removed to accommodate optional modules. Media adapter slot...
Installing the Express Hub Requirements Rack installation requirements Table and shelf installation requirements Temperature Humidity Ventilation Operating conditions Service access Wiring hardware Power Standard 19-in. (48.26 cm.) EIA equipment rack 1.5 EIA rack-mount spaces available for each Approximately 13.25-in. (33.66 cm.) by 19.25-in. (48.90 cm.) area on a level tabletop or shelf Support for at least 10 lbs.
You can install a maximum of six hubs in an equipment rack or on a shelf or a table. Once the hubs are stacked and secured, connect them using Intel cascade cables. The cascade cable is a unique cable for Express Stackable Hubs.
1 is dis- abled. Intel Express 100BASE-T4 Stackable Hub Removing a Hub from a Stack To remove the hub from a rack Disconnect power to the hub by unplugging the power cable.
C H A P T E R Installing the Express Hub Adding a Network Management Module (NMM) After powering down the hub, install the NMM in the hub at the top of your stack. When an NMM is installed in the stack, it automatically numbers the hubs in the stack.
Devices Connecting Cables to the Hub Connect devices directly to ports on the Express 100BASE-T4 Stackable Hub or to ports on installed uplink modules. This illustration shows how to connect a UTP cable to an RJ-45 connector and a fiber optic cable to an SC connector.
Checking the LEDs When you connect the power cord to the Express 100BASE-T4 Stackable Hub, the hub performs a confidence test. During this test, the hub’s Stat LED lights amber to indicate the test is in progress.
Page 19
C H A P T E R Connecting the Devices • The Data % LEDs light green on each hub, indicating the overall network utilization percentage of the Ethernet segment. Because a stack of hubs is a single segment, utilization is the same for each hub in the stack.
In a fully equipped stack, hubs are assigned numbers 1 through 6. You can identify the unit numbers of the hubs in the stack using network management software such as Intel LANDesk® Network Manager. As you build your stack to include more hubs, each hub you add is...
A 100BASE-FX uplink module is installed in one of the Express Hubs, connecting the hub stack to the switching hub through a 100 Mbps fiber link. Two servers equipped with 100 Mbps LAN adapters are connected to the switch to provide centralized services to workstations in all three workgroups.
Intel Express 100BASE-T4 Stackable Hub Connecting to Non- 100BASE-T4 devices Connecting to 100BASE-TX devices You have two options for connecting the Express 100BASE-T4 Stackable Hub to a 100BASE-TX device: • an Intel 100BASE-TX Uplink Module • a routing server equipped with a 100BASE-T4 NIC and a...
Page 23
100BASE-T4 and 100BASE-TX LAN adapter in your server and let the server bridge the segments. Connecting to 100BASE-FX devices To connect the Express 100BASE-T4 Stackable Hub to a 100BASE-FX device, use an Intel 100BASE-FX Uplink Module. The 100BASE-FX Uplink Module fits in the hub’s media adapter slot and allows you to connect to 100BASE-FX devices.
Page 24
Intel Express 100BASE-T4 Stackable Hub 100BASE-TX Uplink Module and 10/100 Downlink Intel’s 100BASE-TX Uplink Module fits in the hub’s media adapter slot and allows you to connect to 100BASE-TX devices, such as the Express 10/100 Downlink. The Express 10/100 Downlink allows you to connect to 10BASE-T devices.
Fast Ethernet Topology Rules This appendix describes • • For a complete explanation of the set of 100BASE-T rules and guidelines, refer to the Institute of Electrical and Electronics Engineers (IEEE) 100BASE-T 802.3u standard. For information about cables for Ethernet networks, refer to the Electronic Industries Association/Telecommunications Industry Association (EIA/TIA) wiring standard EIA/TIA 568.
• You can’t use UTP cabling to connect Express Stackable Hubs to each other. Express Stackable Hubs are Class I repeaters and can be connected only with Intel Cascade Cables. Distance limitations 100BASE-T4 and 100BASE-TX The EIA/TIA 568 wiring standard specifies that UTP wiring must not exceed 100 meters (328 feet) from repeater to workstation or switch.
Page 27
A P P E N D I X Fast Ethernet Topology Rules Repeater rules The 100BASE-T standard defines two types of repeaters — Class I and Class II. The Express Stackable Hub is a Class I repeater. Class I repeaters (sometimes called translational repeaters) limit the number of repeaters in a physical domain to one.
A P P E N D I X Intel Express 100BASE-T4 Stackable Hub Network Topology Extensions You can extend the network topology by connecting Express Stackable Hubs to a switching hub. In the illustration below, the network topology is extended to a maximum of 400 meters (1312 feet).
Page 29
491 meters (1610 feet). In this network, a 160 meter (524 feet) fiber link connects the 100BASE-TX repeater to the switch, and a 131 meter (429 feet) fiber link connects the 100BASE- T4 repeater to the switch. 100 meter (328 feet) Category 5 UTP wiring connects workstations and servers to the repeater stacks.
Page 30
A P P E N D I X Intel Express 100BASE-T4 Stackable Hub You can extend the 100BASE-T network topology further by interconnecting the switches using fiber links. Interconnecting two switches creates a network that contains four separate collision domains. The overall network topology grows while each collision domain can be modeled after the extended collision domains shown in the previous two illustrations.
Page 31
100 Mbps equipment in your network. The Intel 100BASE-TX Uplink Module (Intel product code EC100MATX) provides a standard RJ-45 connector for Category 5 UTP cable. The maximum distance between the port and the attached 100BASE-TX device is 100 meters (including all patch cables, panels, and connectors).
Page 32
Express Stackable Hubs so you can expand port connections in a network segment. A stack can contain a maximum of six hubs. When connected using Intel cascade cables, the entire stack of hubs acts as a single repeater or collision domain.
A P P E N D I X Optional Equipment and Technical Specifications Technical Specifications Network Protocol and Standards Compatibility IEEE 802.3u 100BASE-T Data Rate T4: 100 Mbps with 8B/6T coding scheme TX: 100 Mbps with 4B/5B coding scheme FX: 100 Mbps with 4B/5B coding scheme Electrical Specifications Input power: 160 W...
Page 34
A P P E N D I X Intel Express 100BASE-T4 Stackable Hub Safety Agency Approvals UL listed (UL 1950) Third Edition UL listed for Canada TUV certified to IEC 950 Second Edition plus A1/A2 and EN60950 A1/A2 Repeater Type...
In the interest of improving internal design, operational function, or reliability, Intel Corp. reserves the right to make changes to the products described in this document without notice. Intel Corp. does not assume any liability that may occur due to the use or application of the products or circuit layouts described herein.
Page 36
Das System darf weder an eine Stromquelle angeschlossen sein noch eine Verbindung mit einer Telekommunikationseinrichtung, einem Netzwerk oder einer Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird. Nehmen Sie das System nicht ohne die Abdeckung in Betrieb. Intel Express 100BASE-T4 Stackable Hub...
Page 37
A P P E N D I X AVVERTENZA Il sistema è progettato per funzionare in un ambiente di lavoro tipico. Scegliere una postazione che sia: · Pulita e libera da particelle in sospensione (a parte la normale polvere presente nell’ambiente). ·...
(RMA) number either to the company from whom you purchased it or to Intel (North America only). If you ship the product, you must assume the risk of damage or loss in transit. You must use the original container (or the equivalent) and pay the shipping charge.
Page 39
1 Media Adapter LED operating conditions 6 verifying installation 17 100BASE-FX data rate 31 devices, connecting to 21 distance limitations 24, 27 media specification 24 uplink module 29 100BASE-FX Uplink Module installation guidelines 12 using 21 100BASE-T network topology extensions 26 switched LAN 19 100BASE-T4 data rate 31...
Page 43
Intel Automated Customer Support You can reach Intel’s automated support services 24 hours a day, every day at no charge. The services contain the most up-to-date information about Intel products. You can access installation instructions, troubleshoot- ing information, and general product information.