Table of Contents
Advertisement
2.0
Chassis Viewer Overview
Chassis Viewer is Intel
provides the primary management interface for the Intel
the user to perform management, configuration, and monitoring tasks related to IB
networks.
The Chassis Viewer runs on the firmware of the 12300 and each management module
of the 12800 series. The browser must be on a workstation that has IP connectivity to
the LAN port (RJ-45 connector) on the switch.
• To access Chassis Viewer, point a browser to the IP address of the switch.
For a list of supported browsers, please refer to the Intel
• If user authentication is enabled, the User Authentication window shown in
Figure 2-1
Figure 2-1.
User Authentication
— The default user name and password need to be entered:
• User name:
• Password:
The Chassis Viewer home page is displayed.
The Chassis Viewer manages:
• The switch chassis
• Each director-class leaf module
• Each director-class spine module
• Each director-class management module
• Logging and monitoring functionality
July 2015
Doc. Number: G91930 Revision: 005US
®
's browser-based device management software. Chassis Viewer
is displayed:
admin
adminpass
®
12000 switches, allowing
®
12000 Release Notes.
®
Intel
True Scale Fabric Switches 12000 Series
User Guide
13
Advertisement
Table of Contents
