Figure 3-4.
Log System Configurator: Device Tab
3.2.1.1
Device Tab
The Device tab
following software modules:
• RAM – The circular log buffer contained in memory. To access the contents of this
buffer, use the Chassis Viewer View Log button.
• Syslog – Messages that are sent to the syslog host specified on the Syslog tab.
From this window, the user can change any of the log level settings for a specific
software module by clicking on the Configure button, which displays a configuration
window:
Figure 3-5.
Device Tab: Software Module Configurator
To change any Log Level settings:
1. Click the On-Off check box to the right of the setting.
2. Click the Apply button to save any changes.
The following list describes each of the Log Level configuration parameters.
July 2015
Doc. Number: G91930 Revision: 005US
(Figure
3-5) presents current log level configuration settings for the
®
Intel
True Scale Fabric Switches 12000 Series
User Guide
27