Setting Mac Address Control; Setting Up An Allow Access List - Belkin Wireless G Plus MIMO Router F5D9230-4 User Manual

Using the Web-Based Advanced User Interface

Setting MAC Address Control

The MAC address filter is a powerful security feature that allows you to specify
which computers are allowed on the wireless network. Note: This list applies
only to wireless computers. This list can be configured so any computer
attempting to access the wireless network that is not specified in the filter list
will be denied access. When you enable this feature, you must enter the MAC
address of each client (computer) to which you want to allow network access.
The "Block" feature lets you turn on and off access to the network easily
for any computer without having to add and remove the computer's MAC
address from the list.
(1)

Setting up an Allow Access List

1.
Select the "Allow" radio button (1) to begin setting up a list of
computers allowed to connect to the wireless network.
2.
Next, in the "MAC Address" field that is blank (2), type in the MAC
address of the wireless computer you want to be able to access the
wireless network, then click "<<Add" (3).
3.
Continue to do this until all of the computers you want to add have
been entered.
4.
Click "Apply Changes" (4) to finish.
(2)
(4)
61
(3)
1
2
3
4
5
6
7
8
9
10