Changing Lan Settings - Belkin Wireless G Plus MIMO Router F5D9230-4 User Manual

Using the Web-Based Advanced User Interface

Changing LAN Settings

All settings for the internal LAN setup of the Router can be viewed and changed here.
1. IP Address
The "IP address" is the internal IP address of the Router. The default IP address
is "192.168.2.1". To access the advanced setup interface, type this IP address
into the address bar of your browser. This address can be changed if needed. To
change the IP address, type in the new IP address and click "Apply Changes".
The IP address you choose should be a non-routable IP. Examples of a non-
routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2. Subnet Mask
There is no need to change the subnet mask. This is a unique, advanced feature
of your Belkin Router. It is possible to change the subnet mask if necessary;
however, do NOT make changes to the subnet mask unless you have a specific
reason to do so. The default setting is "255.255.255.0".
(1)
(2)
)
(3
(4)
(5)
(6)
46