Changing The Login Time-Out Setting; Setting The Time And Time Zone - Belkin Wireless G Plus MIMO Router F5D9230-4 User Manual

Using the Web-Based Advanced User Interface

Changing the Login Time-Out Setting

The login time-out option allows you to set the period of time that you can
be logged into the Router's advanced setup interface. The timer starts when
there has been no activity. For example, imagine you have made some
changes in the advanced setup interface, then left your computer alone
without clicking "Logout". Assuming the time-out is set to 10 minutes, 10
minutes after you leave, the login session will expire. You will have to log into
the Router again to make any more changes. The login time-out option is for
security purposes and the default is set to 10 minutes.
Note: Only one computer can be logged into the Router's advanced setup
interface at one time.

Setting the Time and Time Zone

The Router keeps time by connecting to a Simple Network Time Protocol
(SNTP) server. This allows the Router to synchronize the system clock to the
global Internet. The synchronized clock in the Router is used to record the
security log and control client filtering. Select the time zone that you reside in.
You have the option to select a primary and a backup NTP server to keep your
Router's clock synchronized. Select your desired NPT server from the drop-
down box, or simply keep it as is.
If you reside in an area that observes daylight saving, then place a check mark
in the box next to "Enable Daylight Saving". The system clock may not update
immediately. Allow at least 15 minutes for the Router to contact the time
servers on the Internet and get a response. You cannot set the clock yourself.
85
1
2
3
4
5
6
7
8
9
10