Table of Contents
Advertisement
Rea® Clematis® Pro
5.9 Installing and Removing the Rear
Wheels
WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use.
This can lead to overturning.
– Always ensure that the removable axles are
fully engaged whenever you install a wheel.
WARNING!
Risk of injury
– Check that the rear wheel is securely locked in
position! It should not be possible to remove
the wheels when the quick-release button A
is inactivated.
Self Propulsion
Transit Version
26
Installing the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
3. With the other, hold the wheel through the external
spoke rim around the wheel hub.
4. Using your thumb, press the quick-release button A
and hold it down.
5. Push the rear wheel axle B into the adapter sleeve C
up to the stop.
6. Release the quick-release button and make sure that
the wheel is secure.
7. For Transit version, insert the quick-release cap D on
the quick-release button B.
Removing the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
3. For Transit version, remove the quick-release cap D of
the quick-release button B.
4. With the other, hold the wheel through the external
spoke rim around the wheel hub.
5. Using your thumb, press the quick–release button A.
Keep it pressed and pull the wheel out of the adapter
sleeve C.
5.10 Angle adjustable leg rests
To install or remove the Swing away, Angle adjustable leg
rest, refer to
→ 3.9.2 Swing away, angle adjustable leg rests, page 15.
5.11 Fixed leg rests
To install or remove the Swing away, Fixed leg rest, refer to
→ 3.9.1 Swing away leg rests, page 14.
5.12 Mounting the table tray
A
B
Mount the table tray A in the table tray attachments B.
1653395-C
Advertisement
Table of Contents
