NEC Xen Master System Hardware Manual page 32

NEC Australia Pty Ltd
Equipment
Name
HFU-UA (WH) This Handsfree Unit is an optional unit that
provides
Unit
communication on any DTU-type Multiline
Terminal.
This unit comes with the handsfree
Adaptor and an external microphone.
PCT(C)-U13 The NEC PC Telephony Board (TAPI) with
a Telamux interface. The VDD-UA Unit is
Unit
built into the PCT(C)-U13 unit so that this
unit can connect directly to the VDH2(8)-
U13 ETU.
PCT(S)-U13 The NEC PC Telephony Board (TAPI)
without a modem.
Unit
This board can be installed on the ISA bus
on any IBM-compatible PC.
PCT(M)-U13 The NEC PC Telephony Board (TAPI)
without a modem.
Unit
This board can be installed on the ISA bus
on any IBM-compatible PC.
SLT(1)-U13 The
provides an interface for Single Line
ADP
Telephones and other similar devices from
an ESI ETU channel.
This Adaptor can be connected to any ESI
port.
VDD-UA Unit The Telamux Interface Adaptor provides
LAN split for digital terminals when the
VDH2(8)-U13 ETU is used. This unit is
used to incorporate LAN and telephone
lines into one cable.
This Adaptor can be installed on any DTU-
type Multiline Terminal.
WMU-UA Unit This Wall Mount Unit is used to mount any
DTU-type Multiline Terminal to the wall.
This unit connects to the back side of the
Multiline Terminal.
This unit is required when an APR-UA
Unit, CTA-UA Unit, HFU-UA (WH) Unit, or
a VDD-UA Unit is installed.
WMU-W Unit This universal Wall Mount Unit is used to
mount any ETW-type Multiline Terminal to
the wall.
MAT S/W Maintenance Access Terminal Software
for Technician.
(Technician)
1 - 14
Table 1-1 Equipment List (Continued)
Description
full-duplex
Single Line Telephone
Basic
KSU
64
handsfree
32
32
32
Adaptor 7
24
64
64
Software
N/A
Xen Master & Xen Axis
Xen Master
Basic + 1 Basic + 2
Expansion Expansion
KSU KSUs
120 120
48 72
120 120
120 120
Xen Axis
32
24
32
32
Introduction