Figure 7-26 Ctu(S) Connection; Figure 7-27 Base Of Dtu-Type Mlt - NEC Xen Master System Hardware Manual

System Hardware Manual
3.5.1.3 Connection
A CTU(S)-UA Unit can support an ESI(8)-U13
ETU connection only.

Figure 7-26 CTU(S) Connection

Required Equipment:
• ESI(8)-U13 ETU
• DTU-type MLT
• CTU(S)-UA Unit
• ACA-U13 Unit (AC Adapter) (not provided)
• USB cable (A to B type) (not provided)
3.5.1.4 Set-up Sequence
Configure the CTU(S) with the DTU-type MLT
as follows.
1. Flip phone upside down.

Figure 7-27 Base of DTU-type MLT

2. Open DTU-type MLT's tilt-leg.
May 2001
7 - 211