NEC Xen Master System Hardware Manual page 16

NEC Australia Pty Ltd
S -
UPPORTING
D
OCUMENTS
xviii
Chapter 6 - Installing Xen Multiline Terminals
This chapter describes each terminal that is available with the Xen system
and provides installation instructions.
Chapter 7 - Installing Optional Equipment
This chapter provides installation instructions for optional equipment that
can be added to the system as customer business grows.
Chapter 8 - Installing Xen Professional Telephones
This chapter provides instructions for installing Xen Professional terminals
on the Xen system.
Chapter 9 - System Maintenance
This chapter provides the technician with a guide to troubleshooting and
diagnosing problems during and after system installation.
The Xen system has a set of manuals to provide all the information
necessary to install and support the system. The remaining manuals that
comprise the set are described below.
Xen Features and Specifications Manual
This manual provides details related to every feature available in the
system.
Xen Programming Manual
This manual provides instructions for programming the Xen system.
Xen Lease Cost Routing Manual
This manual provides instructions to the service technician for
programming the customer site for least cost routing.
Xen Automatic Call Distribution Manual
This manual provides the service technician with instructions for
programming the ACD. This manual can also be used by the ACD
supervisor, at the customer site, to use to become familiar with the ACD/
MIS feature.
Xen Master & Xen Axis
Preface