Table 5-17 Configuration Support Table - NEC Xen Master System Hardware Manual

System Hardware Manual
This ETU provides two or four digital voice mail ports.
Refer to Table 5-17 Configuration Support Table.

Table 5-17 Configuration Support Table

Function
Applications
Message Notification
Call Forwarding
Applications
Message Notification
Call Forwarding
Operator Console
Hardware
Connections
Telephone
Configuration Support
Automated Attendant/Voice Mail with call
forwarding (release transfer)
Automated Attendant/Voice Mail without call
forwarding (await answer transfer)
Voice Mail only (No transfer)
Through message waiting lamps
Supported
Automated Attendant/Voice Mail with call
forwarding (release transfer)
Automated Attendant/Voice Mail without call
forwarding (await answer transfer)
Voice Mail only (No transfer)
Through message waiting lamps
Supported
100 (default)
Positive disconnect: Digital Signal
One FMS(2/4)-U13 ETU
Connects to backplane connector of the KSU
One of the following telephones is required to
program Xen system data:
DTU-8D-1A(WH) TEL
DTU-16D-1A(WH) TEL
DTU-32D-1A(WH) TEL
ETW-16C-1A(SW) TEL (Not available in NZ)
ETW-16D-1A(SW) TEL (Not available in NZ)
ETW-24S-1A(SW) TEL (Not available in NZ)
May 2001
5 - 169