D-Link DIR-604 User Manual page 62

Section 3 - Configuration
Traffic Control is used to equally distribute download bandwidth to LAN/wireless clients. This can be done automatically
or manually. To use this feature, enable traffic control and then choose to automatically or manually distribute bandwith.
Next, click New Scheduler and configure a schedule on the Schedule page. Finally, if you have chosen the manual
option, tick the desired corresponding traffic control rule check box and then click Save Settings.
Enable Traffic
Tick the Enable Traffic Control check box to
Control:
enable the traffic control feature.
Automatic Tick the Automatic Distribute Bandwidth check
Distribute box to automatically equally share bandwith
among LAN and wireless clients.
Bandwidth:
Enter the desired bandwith in kbps.
Key in
bandwidth
manually:
Manually configure beginning and ending IP
IP Range:
address ranges for traffic control rules. To
activate, tick the corresponding check box for
each desired traffic control rule.
Select Guaranteed minimum bandwidth or
Mode:
Restricted maximum bandwidth.
Enter the bandwith for the specific traffic control
Bandwidth
rule.
(kbps):
Use the drop-down menu to select the schedule
Schedule:
for the traffic control rule. Click the New
Scheduler button to bring up the Schedule
page. This is used to configure a new schedule.
D-Link DIR-604 User Manual
Traffic Control
58