Table of Contents
Advertisement
Section 2 - Installation
To use the DIR-604 in Router Mode, follow the steps below:
1. Ensure you have a broadband Internet connector, such
as a cable or DSL client line that connects the Internet to
your home or office.
2. Connect the cable properly or install the modem.
3. Connect the cable or modem with the broadband router.
4. Move the switch to Router Mode.
5. If you want to link with a computer on the Internet, please
install a wireless dongle on your computer.
6. Install the driver on your computer.
D-Link DIR-604 User Manual
Connection - Router Mode
10
Advertisement
Table of Contents
