Table of Contents
Advertisement
Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
My Internet
Select L2TP (Username/Password) to obtain IP Address
Connection is:
information automatically from your ISP.
Address Mode:
Select Static IP if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, users will select Dynamic IP (DHCP).
L2TP IP
Enter the IP address (Static L2TP only).
Address:
L2TP Subnet
Enter the subnet mask (Static L2TP only).
Mask:
L2TP Gateway
Enter the gateway IP address provided by your ISP.
IP Address:
Primary DNS
Enter the primary DNS server Address (Static L2TP only).
Server:
MAC Address:
The default MAC address is set to the Internet port's physical
interface MAC address on the broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Copy Your
PC's MAC Address button to replace the Internet port's MAC
address with the MAC address of your Ethernet card.
L2TP Server IP
Enter the server IP address provided by your ISP (optional).
Address:
User Name:
Enter your L2TP user name.
D-Link DIR-604 User Manual
Manual Internet Configuration (L2TP)
47
Advertisement
Table of Contents
