Configure The Drive Unit - Siemens Sinamics G120P Operating Instructions Manual

Commissioning
5.5 Procedure for commissioning via STARTER
5.5.2

Configure the drive unit

In the project navigator, open the component that contains your drive unit.
Figure 5-13 Project navigator – configuring the drive unit
⇒ In the project navigator, click on the drive device you want to configure.
⇒ Click on the button "Connect to selected target devices".
⇒ Define the selected access point to the selected target device.
152
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A