Maytag MXR65 Service Manual page 47

10. Remove the 10mm hex head bolts from
front corners of chemical dispenser support.
10mm Hex
Head Bolt
11. Clip the wire ties that secure the air tube to
the front of the support.
Wire Ties
12. Remove the T-20 screw securing the
center support brace to the chemical
dispenser support.
T-20 Screw
13. Remove the T-20 screw securing the
center support brace to the back edge of
washer.
T-20 Screw
14. Remove the center support brace.
15. Remove the chemical dispenser support.
3-23