Installation Of The Top Cover Plate Of The Light Processor Compartment - Barco DP2K SLP Series User And Installation Manual

15. Removal and installation of the projector covers

15.8 Installation of the top cover plate of the Light Processor compartment

Necessary tools
Allen wrench 3 mm
How to install the top cover plate from the Light Processor compartment?
1. Install the top cover plate as follows:
a) Approach the projector with the top cover plate tilted as illustrated and insert the two hooks of the top cover plate into the
projector chassis (see detailed illustration image 15-10).
b) Lower the top cover plate completely.
c) Grip the two knobs (reference 2 image 15-10) , slide the top cover plate to the rear side of the projector and ensure that all
slots (reference 1 image 15-10) of the top cover plate are engaged.
Image 15-10
2. Fasten the top cover plate with four screws (reference 1 image 15-11). Use a 3 mm Allen wrench.
1
Image 15-11
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
140
C
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
1
C
2
A
B
R5906847 DP2K SLP SERIES 02/06/2017