Pjlink Protocol - Panasonic TH-98SQ1W Operating Instructions Manual

PJLink protocol

The unit's Network function is compatible with PJLink
Class 1. The following operations can be performed from
a computer when PJLink protocol is used.
●
Setting the Display
●
Querying the Display status
Supported commands
The commands to control the unit with PJLink protocol
are as follows.
Command
POWR Power control
0: Standby
1: Power On
POWR? Power status query
0: Standby
1: Power On
INPT Input switch
11: PC IN input
31: HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33: DisplayPort IN input (DisplayPort)
34: DIGITAL LINK input
35: DVI-D IN input (DVI-D)
36: SLOT input (SLOT)
41: USB input (USB)
42: MEMORY VIEWER input
INPT? Input switch query
11: PC IN input
31: HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33: DisplayPort IN input (DisplayPort)
34: DIGITAL LINK input
35: DVI-D IN input (DVI-D)
36: SLOT input (SLOT)
41: USB input (USB)
42: MEMORY VIEWER input
90
English
Control
(DIGITAL LINK)
(MEMORY VIEWER)
(DIGITAL LINK)
(MEMORY VIEWER)
Command
AVMT Shutter control
10: Picture On
(picture mute deactivated)
11: Picture Off
(picture on mute)
20: Audio On
(audio mute deactivated)
21: Audio Off
(audio on mute)
30: Shutter mode Off
(picture and audio mute
deactivated)
31: Shutter mode On
(picture and audio on mute)
AVMT? Shutter control query
11: Picture Off (picture on mute)
21: Audio Off (audio on mute)
30: Shutter mode Off
(picture and audio mute
deactivated)
31: Shutter mode On
(picture and audio on mute)
ERST? Error status query
First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Other error. 0 or 2.
● Meaning of 0, 2.
0: Error is not detected,
2: Error
LAMP? Lamp status query
Not supported
INST? Input switch list query
11: PC IN input
31: HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33: DisplayPort IN input (DisplayPort)
34: DIGITAL LINK input
(DIGITAL LINK)
35: DVI-D IN input (DVI-D)
36: SLOT input (SLOT)
41: USB input (USB)
42: MEMORY VIEWER input
(MEMORY VIEWER)
NAME? Display name query
The name selected in [Display name]
is returned.
INF1? Manufacturer name query
Returns "Panasonic".
Control