Video Equipment Connection - Panasonic TH-98SQ1W Operating Instructions Manual

Video equipment connection

1 EXT SP: Speaker Terminal
Connect to external speaker.
(see page 29)
2 AUDIO OUT: Analogue Audio Output
Terminal
Connect to audio equipment with
analogue audio input terminal.
(see page 28)
3 DIGITAL LINK / DIGITAL LINK / LAN Terminal
LAN:
Control the Display by connecting
to Network. Alternatively, connect
to a device that sends video and
audio signals via the DIGITAL
LINK terminal.
(see page 25, 84)
4 SERIAL IN: SERIAL Input Terminal
Control the Display by connecting
to PC.
(see page 26)
5 LAN: LAN Terminal
Control the Display by connecting
to Network.
(see page 84)
6 IR IN, Infrared Signal Input / Output
IR OUT: Terminal
Use this when operating more
than one display with one remote
control.
(see page 27)
7 USB: USB Terminal (2 systems)
Connect the USB memory to use
"USB media player" or "Memory
viewer". Also, this can be used
to supply power of up to 5V/1A
(front side terminal) or 5V/2A
(far side terminal) to an external
device when the picture is
displayed.
(see page 28)
13
7 8
8 PC IN: PC Input Terminal
Connect to video terminal of PC,
video equipment with "YP
YC
(see page 22)
9 DisplayPort IN, DisplayPort Input / Output
DisplayPort OUT: Terminal (Supports 4K picture)
Connect to PC or video
equipment with DisplayPort
terminal. (see page 23)
10 AV IN HDMI Input Terminal
(HDMI 1, (2 systems)
HDMI 2):
Connect to video equipment with
HDMI output.
(see page 20)
11 DVI-D IN: DVI-D Input Terminal
Connect to video equipment with
DVI-D output.
(see page 21)
12 AUDIO IN 1, Analogue Audio Input Terminal
AUDIO IN 2: (2 systems)
(see page 21, 22)
13 SLOT: Expansion slot
(see page 14)
Note
●
For the compatible function board, consult the dealer
where you purchased the product.
10
11
12
Q40G1000-037-79A
9
B
C " or "RGB" output.
B R
English
P /
R
19